Build a 16 channel servo tester using Arduino and 3D printing, with a simple setup and updated channel control for smoother ...

We may receive a commission on purchases made from links. If you have an interest in electronics and have been hanging around DIY tech forums for a while now, chances are you already know what an ...

Your browser does not support the audio element. If you’re going to build an autonomous car, an obvious requirement is that you need to be able to control the ...

Electronic paper or ePaper is a display technology that exhibits the appearance of traditional paper. E Ink is a specific brand of ePaper technology, and it has been deployed in various products that ...

Inverse kinematics control library for MeArm Robotics MeArm with Arduino. The MeArm has four mini servos - one for the claw, and one each to rotate the base, shoulder joint and elbow joint. But it's ...

Functions to go a specified distance: Driving speed PWM (2.0 V) is the PWM value to use for driving a fixed distance. If it is set higher than RAMP_VALUE_OFFSET_SPEED_PWM (2.3 V), the software ...

A new open-source humanoid robot, ALANA, is attracting attention in the maker community for its affordability and functionality. Designed by Shashwat Batish, ALANA is a life-size robot with movable ...

This soccer robot project can effortlessly move forward, reverse, and navigate in multiple directions, including forward-left, forward-right, reverse-left, and reverse-right, all controlled via an ...

As mentioned in the Raspberry Pi Pico 2 article, third-party RP2350 boards are already available, and one of them is the MOTION 2350 Pro board from Cytron designed for robotics and motor control. The ...

3D print and Assemble an Arduino-based Custom Remote-Controlled Drift Car That Emits Realistic Smoke for Thrilling Indoor Drifting! This time, we’re building a 1:24-scale, fully-3D printed miniature ...